Fundavit anno 1997,
Zhejiang Bolei Coatings Co., Ltd. Subsidiarium est Societas Bolei Industrialis, cum pluribus subsidiariis occupatis in vestimentis fabricandis, constructionibus servitiis, novis evolutionis materialibus, et commercio internationali.
As professional China Chlorinated Purgamentum Primer Manufacturers and Custom Chlorinated Purgamentum Primer Suppliers, we specialize in anti-corrosion coatings, fireproof coatings, emulsion paints, epoxy floor paints, and JS waterproof paints, widely applied in both industrial and construction sectors.
Cum provectae productionis facultates, ratio severa qualitas temperantiae, et catenae materiae rudis stabilis, summus qualitas et cost-competitiva productorum vestis et machinalis solutiones clientibus nostris per orbem terrarum trademus.
Basic Properties
Amet lentus;
Bonae vires mechanicae;
Egregia humilis temperatura applicationis effectus;
Praeclara aquae resistentia;
Praeclara tempestas resistit;
Erugo bonum munimentum.
Commendatur usus
Usus primarius potest pro ferro structurae modice ad ambitus mordaces graviter (zonas immersiones includendas).
Superficies Praeparatio
Omnes superficies mundae, aridae et sine sordibus debent esse. Superficies aestimandi sunt et praeparandi ad normam ISO 8504.
Munditia: Sandblasted to Sa 2 1/2 (ISO 8501-1:1988).
Superficies picta
Munda, arida, integra compatitur primario.
Applicationem Conditions
Temperatura subiecta sit saltem 3°C supra punctum ros aeris. Temperatura et humiditas relativa metiri debent circa subiectum. Bona evacuatio plerumque requiritur in locis angustiis ad siccationem propriam curandam.
Commendatur Coatings
Primario: Chlorinated Flexilis primario
Medium: Flexilis micaceum ferrum chlorinatum medium
Topcoat: Chlorinated Flexilis Topcoat vel mutatio-component Donec Topcoat
Repono
Secundum normas nationales condi debet. Repositio temperatura commendata est 15-25°C. In ambitu repono siccum, frigus, bene ventilatum, et a fontibus caloris et ignitionis removere debet. Continens arcte occlusum debet custodiri. Ad 25°C, fasciae vita 12 saltem mensium est.
Packaging
25 kg/orum.
| Technical Specifications | |
| Color | Gray, Red |
| Volumen solidorum (%) | 42% |
| Gravitas Imprimis | 1.4 kg/L |
| Flash Point | 32°C ± 2 (Caxa clausa) |
| Glossa | Semi-Gloss |
| Organic Composita volatilia | 500 g/L |
| Commendatur arida film Crassitudo | 50-100 μm |
| Crassitudine film et coating rate | |||
| Descriptio | Minimum | Maximum | Typical |
| Arida film Crassitudo (μm) | 50 | 100 | 75 |
| Infectum film Crassitudo (μm) | 120 | 240 | 180 |
| Theoretical Expansing Rate (m²/kg) | 6 | 3 | 4 |
| Construction Parameters | |
| Applicationem Methodo | Imbre: Airless imbre |
| Peniculus: Commendatur pro pictura praecocitantem, parvam aream, et reparationem | |
| Tenuior / Cleaner | Specialis tenuior |
| DIRECTORIA PRINCIPIA Airless Spray | |
| COLLUM Pressura | 12-15 MPa |
| COLLUM Orificium | 0.38-0.48 mm (0.015-0.019") |
| Spray Fan Anglus | 40-80° |
| Tenuior Additio | Specialis tenuior, generally 0-5% of total paint volume |
| DIRECTORIA PRINCIPIA CONVENTIALIS Spray | |
| COLLUM Pressura | 0.3-0.6 MPa |
| COLLUM Orificium | 1.8-2.2 mm |
| Tenuior Additio | Specialis tenuior, generally 5-15% of total paint volume |
| Peniculus et Rollerus Application | |
| Tenuior Additio | Specialis tenuior, generally 0-5% of total paint volume |
| Remittit Characteres | |||||
| Substratum Temperature | 0°C | 5°C | 10°C | 23°C | 40°C |
| tangere arida | VI horas | I hora | 45 min | XXX min | 15 min |
| durum Siccum | XXX horas | X horis | VIII horas | VI horas | IV horas |
| Minimum Recoat Tempus | XXX horas | V horas | IV horas | VI horas | 1.5 horas |
| Maximum Recoat Tempus | Nullus | - | - | - | - |
ENG
