Fundavit anno 1997,
Zhejiang Bolei Coatings Co., Ltd. Subsidiarium est Societas Bolei Industrialis, cum pluribus subsidiariis occupatis in vestimentis fabricandis, constructionibus servitiis, novis evolutionis materialibus, et commercio internationali.
As professional China Chlorinated Purgamentum Anticorrosive Topcoa Manufacturers and Custom Chlorinated Purgamentum Anticorrosive Topcoa Suppliers, we specialize in anti-corrosion coatings, fireproof coatings, emulsion paints, epoxy floor paints, and JS waterproof paints, widely applied in both industrial and construction sectors.
Cum provectae productionis facultates, ratio severa qualitas temperantiae, et catenae materiae rudis stabilis, summus qualitas et cost-competitiva productorum vestis et machinalis solutiones clientibus nostris per orbem terrarum trademus.
Basic Properties
Tough film;
Bonae vires mechanicae;
Egregia humilis temperatura applicationis effectus;
Praeclara aquae resistentia;
Praeclara tempestas resistit;
Erugo bonum munimentum.
Recommended Uses
Can be used as a Topcoat for chlorinated rubber anticorrosive systems on steel structures exposed to moderate to severe corrosive environments (including immersion zones). Potest etiam adhiberi ut topcoat anticorrosivum in carinae et superstructurae navis.
Surface Preparation
Omnes superficies mundae, aridae et sine sordibus debent esse. Superficies aestimandi sunt et praeparandi ad normam ISO 8504.
Munditia: Sandblasted to Sa 2 1/2 (ISO 8501-1:1988).
Painted Surfaces
Tersus, siccus, illaesis compatibilis primario.
Application Conditions
Temperatura subiecta sit saltem 3°C supra punctum ros aeris. Temperatura et humiditas relativa metiri debent circa subiectum. Bona evacuatio plerumque requiritur in locis angustiis ad siccationem propriam curandam.
Recommended Applications
Primario: Magnopere chlorosulfonated polyethylene primario
Medium: Valde intermedium ferrum chlorosulfonatum polyethylenum micaceoum
Topcoat: Highly chlorosulfonated polyethylene Topcoat vel modificatum-component acrylic Topcoat
Repono
Secundum normas nationales condi debet. Repositio temperatura commendata est 15-25°C. In ambitu repono siccum, frigus, bene ventilatum, et a fontibus caloris et ignitionis removere debet. Continens arcte occlusum debet custodiri. Ad XXV°C, productum fasciae vitam saltem 12 mensium habet.
Packaging
25 kg/drum.
| Technical Specifications | |
| Color | Varii Colores |
| Volumen solidorum (%) | 42% |
| Gravitas Imprimis | 1.4 kg/L |
| Flash Point | 32℃± 2 (Caxa clausa) |
| Glossa | Satin |
| Organic Composita volatilia | 500 g/L |
| Commendatur arida film Crassitudo | 50-100 μm |
| Crassitudine film et coating rate | |||
| Minimum | Maximum | Typical | |
| Arida film Crassitudo (μm) | 50 | 100 | 75 |
| Infectum film Crassitudo (μm) | 120 | 240 | 180 |
| Theoretical Expansing Rate (m²/kg) | 6.0 | 3.0 | 4.0 |
| Construction Parameters | |
| Applicationem Methodo | SPARSIO: Usus airless spargit |
| Brushing: Commendatur pro tunica, parva area pictura, et tactus. | |
| Tenuior / Cleaner | Specialis tenuior |
| DIRECTORIA PRINCIPIA Airless Spraying | |
| COLLUM Pressura | 12-15 MPa |
| COLLUM Orificium | 0.38-0.48 mm (0.015-0.019") |
| Spray Latitudo | 40-80° |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-5% of the total paint quantity |
| DIRECTORIA PRINCIPIA CONVENTALES SPARSIONES | |
| COLLUM Pressura | 0.3-0.6 MPa |
| COLLUM Orificium | 1.8-2.2 mm |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 5-15% of the total paint quantity |
| Percutientium et Rolling | |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-5% of the total paint quantity |
| Remittit Characteres | |||||
| Substratum Temperature | 0℃ | 5℃ | 10℃ | 23℃ | 40℃ |
| tangere arida | VI horas | I hora | XLV minuta | XXX minuta | XV minuta |
| durum Siccum | XXX horas | X horis | VIII horas | VI horas | IV horas |
| Minimum Recoat Tempus | XXX horas | V horas | IV horas | VI horas | 1.5 horas |
| Maximum Recoat Tempus | Nullus | - | - | - | - |
ENG
