Fundavit anno 1997,
Zhejiang Bolei Coatings Co., Ltd. Subsidiarium est Societas Bolei Industrialis, cum pluribus subsidiariis occupatis in vestimentis fabricandis, constructionibus servitiis, novis evolutionis materialibus, et commercio internationali.
As professional China Epoxy Zinc Phosphate Primer Manufacturers and Custom Epoxy Zinc Phosphate Primer Suppliers, we specialize in anti-corrosion coatings, fireproof coatings, emulsion paints, epoxy floor paints, and JS waterproof paints, widely applied in both industrial and construction sectors.
Cum provectae productionis facultates, ratio severa qualitas temperantiae, et catenae materiae rudis stabilis, summus qualitas et cost-competitiva productorum vestis et machinalis solutiones clientibus nostris per orbem terrarum trademus.
Basic Features
Lata pellicula-formantia range;
Egregium corroditur munimentum;
Velox siccatio proprietatibus permittit ut cito emunctionem.
Materia volatilis organica signis internationalibus occurrit.
Arida resistentia temperatura usque ad 1400°C.
Commendatur Applications
Sicut primarius ad tunicas sustinendas, apta est structuras ferreas in terra illa oleum et gas, structuras ferri marinas, pontes, vim venti, petroleum, chemicum, et industrias constructiones. Topcoat adhiberi potest etiam ad applicationes speciales.
Superficies Praeparatio
Omnes superficies depingendae debent esse purae, siccae et sine oleo et aliis contaminantibus. Superficies aestimandae et praeparandae sunt secundum normas internationales ISO 8504.
Mundicies Level: Sandblasted to Sa 2 1/2 (ISO 8501-1:2007). Asperitas: apta laesura utere (ferro iecit / arena angulari) ad asperitatem superficiei microns 40-85. Applicationem Conditions
Subiecta temperatura infra 5°C cadere non debet ac saltem 3°C supra punctum ros aeris. Temperatura et humiditas relativa metiri debent circa subiectum. Evacuatio bona plerumque in locis angustiis requiritur ad exsiccationem propriam curandam.
Applicando finalem Poenam, superficies pingere debet esse arida et immunis a contagione.
Product Compatibility
Primario: Epoxy phosphate zinci primario
Subsequens fucatur: Epoxy summus constructus pingere, epoxy micaceos ferrum pingere, chlorinatum rubber pingere, vinyl chloride pingere, polyurethane Topcoat, acrylicum pingere, polysiloxane Topcoat, fluorocarbon Topcoat, etc.
Repono
Secundum normas nationales condi debet. Repositio temperatura commendata est 15-25°C. Ambituum repono siccum esse debet et bene ventilari. Vas fasciculum arcte occlusum esse debet.
Shelf Life: 12 months at cella temperies.
Packaging
Component A: 24 kg (basis), Component B (curatio agentis): 4 kg.
| Technical Specifications | |
| Color | Gray, Red |
| Volumen solidorum (%) | 65 ± 2% |
| Gravitas Imprimis | 1.4 kg/L |
| Flash Point | 35°C ± 2; |
| Glossa | Flat |
| Volatile Compounds Organic | 340 g/L |
| Commendatur arida film Crassitudo | 50-150 μm |
| Flexibilitas | bonum |
| Aqua Resistentia | bonum |
| Abrasio Resistentia | Praeclarus |
| Resistentia solvendo | bonum |
| Crassitudine film et coating rate | |||
| Descriptio | Minimum | Maximum | Typical |
| Arida film Crassitudo (μm) | 50 | 150 | 100 |
| Infectum film Crassitudo (μm) | 75 | 230 | 155 |
| Theoretical Expansing Rate (m²/kg) | 9.2 | 3.0 | 4.6 |
| Construction Parameters | |
| Applicationem Methodo | Imbre: Airless imbre vel conventional imbre |
| Peniculus: commendatur reparatione | |
| Ratio mixtionis (pondere) | Component A: Component B = 6: 1 |
| Vita urna at 23 °C | VI horis (decrescit temperatus oritur) |
| Tenuior / Cleaner | Specialis tenuior |
| DIRECTORIA PRINCIPIA Airless Spray | |
| COLLUM Pressura | 15 MPa |
| COLLUM Orificium | 0.38-0.69 mm |
| Tenuior Additio | Specialis tenuior, generally 0-5% of total paint volume |
| DIRECTORIA PRINCIPIA CONVENTIALIS Spray | |
| COLLUM Pressura | 0.3-0.6 MPa |
| COLLUM Orificium | 1.8-2.2 mm |
| Tenuior Additio | Specialis tenuior, generally 5-15% of total paint volume |
| Peniculus et Rollerus Application | |
| Tenuior Additio | Specialis tenuior, generally 5-15% of total paint volume |
| Remittit Characteres | |||||
| Substratum Temperature | 5°C | 10°C | 23°C | 40°C | 40°C |
| tangere arida | VIII horas | VI horas | III horas | 0,5 horas | 15 min |
| durum Siccum | XVIII horis | XII horis | V horas | II horas | IV horas |
| Plena Curatio | XV diebus | X diebus | VII diebus | II diebus | 1.5 horas |
| Minimum Recoat Tempus | XVIII horis | XII horis | V horas | II horas | - |
ENG
