Fundavit anno 1997,
Zhejiang Bolei Coatings Co., Ltd. Subsidiarium est Societas Bolei Industrialis, cum pluribus subsidiariis occupatis in vestimentis fabricandis, constructionibus servitiis, novis evolutionis materialibus, et commercio internationali.
As professional China Epoxy Zinc-Rich Primer Manufacturers and Custom Epoxy Zinc-Rich Primer Suppliers, we specialize in anti-corrosion coatings, fireproof coatings, emulsion paints, epoxy floor paints, and JS waterproof paints, widely applied in both industrial and construction sectors.
Cum provectae productionis facultates, ratio severa qualitas temperantiae, et catenae materiae rudis stabilis, summus qualitas et cost-competitiva productorum vestis et machinalis solutiones clientibus nostris per orbem terrarum trademus.
Commendatur Applications
Ut primarius in generali proposito anti-rubigine Coating systema, structuris ferreis municipalibus usui apta est, facultates petrochemicae, pontes, potentiae plantarum, structurae littoris, et aliae structurae industriae plantae ferro structuris.
Basic Properties
Sicut primarius in systemate Coating adiuvante, apta est structurae ferreae in terra illa oleum et gas, structurae ferri marinales, pontes, vim venti, petroleum, chemica, et industrias constructiones.
Egregiam corrosionem commisit.
Velox siccatio proprietatibus permittit pro supercavendo velox.
Praeclara secanda et glutino proprietas.
Superficies Praeparatio
Omnes superficies depingendae debent esse purae, siccae et sine oleo et aliis contaminantibus. Superficies aestimandae et praeparandae sunt secundum signa internationalia ISO 8504. Munditia Gradus: Abrasiva inspiratione ad Sa 2.5 (ISO 8501-1:2007).
Asperitas: Finis ad medium, 40-85 microns, apta laesurae (ferro arenae iecit/angulares) secundum normas internationales ISO 8503-2.
Applicationem Conditions
Temperatura subiecta non infra -5°C cadere debet ac saltem 3°C supra punctum rorem aeris esse debet. Temperatura et humiditas relativa metiri debent circa subiectum. Evacuatio bona plerumque in locis angustiis requiritur ad exsiccationem propriam curandam.
Cum secundario pinge applicando, superficies fuci arida et contaminatione libera esse debet.
Product Compatibility
De primario: epoxy zinci primario
Commendatur subsequenti cinematographica: epoxy summus constructus fucus, epoxy micaceum ferrum pingere, chlorinatum rubber pingere, vinyl chloride pingere, polyurethane Topcoat, acrylicum pingere, polysiloxane Topcoat, fluorocarbon Topcoat, etc.
Repono
Secundum normas nationales condi debet. Repositio temperatura commendata est 15-25°C. Condite in ambitu sicco et bene ventilato. Serva continens arcte occlusum. Vita fasciae: 12 menses ad locus temperatus.
Packaging
Pars A: 30 kg (basi), Pars B: 3 kg (curanda agentis).
| Technical Specifications | |
| Color | Gray, Red |
| Volumen solidorum (%) | 60± 2% |
| Gravitas Imprimis | 2.3 kg/L |
| Flash Point | 27°C ± 2; |
| Glossa | Flat |
| Volatile Compounds Organic | 340 g/L |
| Commendatur arida film Crassitudo | 25-100 μm |
| Aqua Resistentia | Praeclarus |
| Abrasio Resistentia | Good |
| Resistentia solvendo | Praeclarus |
| Crassitudine film et coating rate | |||
| Minimum | Maximum | Typical | |
| Arida film Crassitudo (μm) | 25 | 100 | 50 |
| Infectum film Crassitudo (μm) | 45 | 165 | 85 |
| Theoretical Expansing Rate (m²/kg) | 10.5 | 2.6 | 5.2 |
| Construction Parameters | |
| Applicationem Methodo | Imbre: Airless imbre vel conventional imbre |
| Peniculus: commendatur reparatione | |
| Ratio mixtionis (pondere) | Component A: Component B = 10: 1 |
| Vita urna in 23°C | VIII horas (decrescat temperatus oritur) |
| Tenuior / Cleaner | Specialis tenuior |
| DIRECTORIA PRINCIPIA Airless Spray | |
| COLLUM Pressura | 15 MPa |
| COLLUM Orificium | 0.38-0.64 mm |
| Tenuior Additio | Specialis tenuior, generally 5-15% of total paint volume |
| DIRECTORIA PRINCIPIA CONVENTIALIS Spray | |
| COLLUM Pressura | 0.3-0.6 MPa |
| COLLUM Orificium | 1.8-2.2 mm |
| Tenuior Additio | Specialis tenuior, generally 5-15% of total paint volume |
| Peniculus et Rollerus Application | |
| Tenuior Additio | Specialis tenuior, generally 0-5% of total paint volume |
| Remittit Characteres | ||||||
| Substratum Temperature | -5°C | 0°C | 5°C | 10°C | 23°C | 40°C |
| tangere arida | VII horas | XC min | 50 min | 20 mins | X min | 4 min |
| durum Siccum | XXIV horas | V horas | III horas | II horas | 1.5 horas | 40 min |
| Plena Curatio | XXI diebus | XV diebus | X diebus | VII diebus | V diebus | II diebus |
| Minimum Recoat Tempus | XXIV horas | V horas | III horas | II horas | 1.5 horas | 40 min |
ENG
