Fundavit anno 1997,
Zhejiang Bolei Coatings Co., Ltd. Subsidiarium est Societas Bolei Industrialis, cum pluribus subsidiariis occupatis in vestimentis fabricandis, constructionibus servitiis, novis evolutionis materialibus, et commercio internationali.
As professional China Rubrum plumbum Alkyd Primer Manufacturers and Custom Rubrum plumbum Alkyd Primer Suppliers, we specialize in anti-corrosion coatings, fireproof coatings, emulsion paints, epoxy floor paints, and JS waterproof paints, widely applied in both industrial and construction sectors.
Cum provectae productionis facultates, ratio severa qualitas temperantiae, et catenae materiae rudis stabilis, summus qualitas et cost-competitiva productorum vestis et machinalis solutiones clientibus nostris per orbem terrarum trademus.
Basic Features
Anti-corrosio primarius est applicationibus marinis vel lenibus ad ambitus modice mordax.
Facilem adhibere;
Velox-siccatio perficiendi;
Apta humili praeparatione subiecta;
Erugo bonum munimentum.
Commendatur usus
Adhibetur ut primario pro aluminio et ferro structurae in systematibus alkyd Coating idoneis. Siccus siccus resistens usque ad 120°C.
Superficies Praeparatio
Purgatio: Sandblast to Sa 2 1/2 (ISO 8501-1:1988).
Roughness: Fine ad medium utens apto calculo angulari (G).
Aliae superficies
Ad aluminium et superficies galvanized, degradationem et leviter arenam vel arenam penicillo. Pro chalybe immaculato, leviter arena vel arena setis cum chloride libero, non-metallico laesura.
Applicationem Conditions
Temperatura subiecta sit saltem 3°C supra punctum ros aeris. Temperatura et humiditas relativa metiri debent circa subiectum. Evacuatio bona plerumque in locis angustiis requiritur ad exsiccationem propriam curandam.
Product Compatibility
Primario: Rubrum plumbum alkyd primario
Poena subsequent commendatur: Alkyd Topcoat
Repono
Secundum normas nationales condi debet. Repositio temperatura commendata est 15-25°C. In ambitu repono siccum, frigus, bene ventilatum, et a fontibus caloris et ignitionis removere debet. Continens arcte occlusum debet custodiri. Ad XXV°C, productum fasciae vitam saltem 12 mensium habet.
Packaging
30 kg/orum.
| Technical Specifications | |
| Color | Red |
| Volumen solidorum (%) | 40% |
| Flash Point | 26°C ± 2; |
| Gravitas Imprimis | 1.6 kg/L |
| Glossa | Flat |
| Adhaesio | Gradus 1 |
| Flexibilitas | 1mm |
| Flexibilitas | bonum |
| Aqua Resistentia | bonum |
| Abrasio Resistentia | Praeclarus |
| Resistentia solvendo | bonum |
| Crassitudine film et coating rate | |||
| Descriptio | Minimum | Maximum | Typical |
| Arida film Crassitudo (μm) | 30 | 50 | 40 |
| Infectum film Crassitudo (μm) | 75 | 125 | 100 |
| Theoretical Expansing Rate (m²/kg) | 8.3 | 5.0 | 6.2 |
| Construction Parameters | |
| Applicationem Methodo | Imbre: Airless imbre |
| Peniculus: Commendatur pro pictura praecocitantem, parvam aream, et reparationem | |
| Tenuior / Cleaner | Specialis tenuior |
| DIRECTORIA PRINCIPIA Airless Spray | |
| COLLUM Pressura | 12-15 MPa |
| COLLUM Orificium | 0.38-0.48 mm (0.015-0.019") |
| Spray Fan Anglus | 40-80 ° |
| Tenuior Additio | Specialis tenuior, generally 0-5% of total paint volume |
| DIRECTORIA PRINCIPIA CONVENTIALIS Spray | |
| COLLUM Pressura | 0.3-0.6 MPa |
| COLLUM Orificium | 1.8-2.2 mm |
| Tenuior Additio | Specialis tenuior, generally 5-15% of total paint volume |
| Peniculus et Rollerus Application | |
| Tenuior Additio | Specialis tenuior, generally 0-5% of total paint volume |
| Tenuior Additio | Specialis tenuior, generally 5-15% of total paint volume |
| Remittit Characteres | |||||
| Substratum Temperature | 0 °C | 5 °C | 10 °C | 23 °C | 40 °C |
| tangere arida | I hora | XXX min | 20 mins | 15 min | X min |
| durum Siccum | IV horas | 2.5 horas | II horas | 1.5 horas | I hora |
| Minimum Recoat Tempus | IV horas | III horas | II horas | 1.5 horas | I hora |
| Maximum Recoat Tempus | Nullus | - | - | - | - |
ENG
