Fundavit anno 1997,
Zhejiang Bolei Coatings Co., Ltd. Subsidiarium est Societas Bolei Industrialis, cum pluribus subsidiariis occupatis in vestimentis fabricandis, constructionibus servitiis, novis evolutionis materialibus, et commercio internationali.
As professional China Alkyd Enamel Manufacturers and Custom Alkyd Enamel Suppliers, we specialize in anti-corrosion coatings, fireproof coatings, emulsion paints, epoxy floor paints, and JS waterproof paints, widely applied in both industrial and construction sectors.
Cum provectae productionis facultates, ratio severa qualitas temperantiae, et catenae materiae rudis stabilis, summus qualitas et cost-competitiva productorum vestis et machinalis solutiones clientibus nostris per orbem terrarum trademus.
Basic Properties
Utuntur enim topcoat in applicationibus marinis vel in ambitu modice mordax.
Facilem adhibere;
Erugo bonum munimentum;
Princeps glossae;
Medii glossae et colori retentio.
Commendatur usus
Sicut Topcoat systemata alkyd conventionales in ferro et ligno, tempestatibus resistentiam, colorem retentionis et potentiam latendi praebet.
Superficies Praeparatio
Omnes superficies mundae, aridae et incontaminatae esse debent. Superficies aestimandae sunt et praeparandae ad normam ISO 8504.
Paratae superficies: munda, arida, et illaesa cum primario compatibili.
Applicationem Conditions
Temperatura subiecta sit saltem 3°C supra punctum ros aeris. Temperatura et humiditas relativa metiri debent circa subiectum. Evacuatio bona plerumque in locis angustiis requiritur ad exsiccationem propriam curandam.
Product Compatibility
Primario: Rubrum plumbum alkyd primario
Sequens Coating: Alkyd intermedia Poena
Topcoat: Alkyd electrum
Repono
Secundum normas nationales condi debet. Repositio temperatura commendata est 15-25°C. Condite in sicco, frigido, bene ventilato, a fontibus caloris et ignitionis. Serva continens arcte occlusum. Vita fasciae: saltem 12 mensibus ante 25°C.
Packaging
20 kg/orum.
| Technical Specifications | |
| Color | Varii Colores |
| Volumen solidorum (%) | 50±2% |
| Flash Point | 36±2 (Caxa clausa) |
| Gravitas Imprimis | 1.1 kg/L |
| Glossa | Princeps Glossae |
| Organic Composita volatilia | 400 g/L |
| Commendatur arida film Crassitudo | 30-50 μm |
| Adhaesio | Gradus 1 |
| Glossa Retention | bonum |
| Aqua Resistentia | Fair |
| Flexibilitas | 0 mm |
| Crassitudine film et coating rate | |||
| Minimum | Maximum | Typical | |
| Arida film Crassitudo (μm) | 30 | 50 | 40 |
| Infectum film Crassitudo (μm) | 60 | 100 | 80 |
| Theoretical Expansing Rate (m²/kg) | 15 | 9 | 11 |
| Construction Parameters | |
| Applicationem Methodo | SPARSIO: Usus airless spargit |
| Brushing: Commendatur pro tunica, parva area pictura, et tactus. | |
| Tenuior / Cleaner | Specialis tenuior |
| DIRECTORIA PRINCIPIA Airless Spraying | |
| COLLUM Pressura | 12-15 MPa |
| COLLUM Orificium | 0.38-0.48 mm (0.015-0.019") |
| Spray Latitudo | 40-80° |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-5% of the total paint quantity |
| DIRECTORIA PRINCIPIA CONVENTALES SPARSIONES | |
| COLLUM Pressura | 0.3-0.6 MPa |
| COLLUM Orificium | 1.8-2.2 mm |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 5-15% of the total paint quantity |
| Percutientium et Rolling | |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-5% of the total paint quantity |
| Remittit Characteres | |||||
| Substratum Temperature | 0℃ | 5℃ | 10℃ | 23℃ | 40℃ |
| tangere arida | VIII horas | V horas | IV horas | III horas | I hora |
| durum Siccum | XXXVI horis | XXV horas | XIV horas | VIII horas | III horas |
| Minimum Recoat Tempus | XLVIII horas | XXXVI horis | XVIII horis | XVI horis | XII horis |
| Maximum Recoat Tempus | Nullus | - | - | - | - |
ENG
