Fundavit anno 1997,
Zhejiang Bolei Coatings Co., Ltd. Subsidiarium est Societas Bolei Industrialis, cum pluribus subsidiariis occupatis in vestimentis fabricandis, constructionibus servitiis, novis evolutionis materialibus, et commercio internationali.
As professional China Acrylic Topcoat Manufacturers and Custom Acrylic Topcoat Suppliers, we specialize in anti-corrosion coatings, fireproof coatings, emulsion paints, epoxy floor paints, and JS waterproof paints, widely applied in both industrial and construction sectors.
Cum provectae productionis facultates, ratio severa qualitas temperantiae, et catenae materiae rudis stabilis, summus qualitas et cost-competitiva productorum vestis et machinalis solutiones clientibus nostris per orbem terrarum trademus.
Characteres fundamentales
Bene comparatum est ut Topcoat pro epoxy et chlorinated systemata Flexilis.
Egregiam habet low-caliditas schedula perficiendi.
Res praeclarissimas ieiunium siccat possessiones.
Habet bonam corrosionem tutelam.
Commendatur usus
Idoneum est ut topcoat chlorinatum rubberinatum, acrylicum, et epoxy coatingatum, et systemata anti-corrosionis coatingentium pro ferro et concretis modice ad ambitus mordaces leviter.
Superficies Praeparatio
Omnes superficies mundae, aridae et sine sordibus debent esse. Superficies aestimandae sunt et praeparandae ad normam ISO 8504.
Pre-cies picta: Tersus, siccus, et in bono statu cum primario compatible.
Applicationem Conditions
Temperatura subiecta saltem 3°C supra punctum rorem aeris esse debet. Temperatura et humiditas relativa metiri debent circa subiectum. Evacuatio bona plerumque in locis angustiis requiritur ad exsiccationem propriam curandam.
Product Compatibility
Primario: Crassitudine aedificare epoxy resinae pingere vel chlorinated Flexilis primario
Commendatur Sub-Pinge: Modified unum elementum Donec Topcoat
Repono
Secundum normas nationales condi debet. Repositio temperatura commendata est 15-25°C. Condite in sicco, frigido, bene ventilato, a fontibus caloris et ignitionis. Serva continens arcte occlusum. Vita fasciae: saltem 12 mensibus ante 25°C.
Packaging
20 kg/orum.
| Technical Specifications | |
| Color | Varii Colores |
| Volumen solidorum (%) | 33% |
| Gravitas Imprimis | 1.1 kg/L |
| Flash Point | 37℃± 2 (Caxa clausa) |
| Glossa | Glossay |
| Organic Composita volatilia | 570 g/L |
| Commendatur arida film Crassitudo | 40-60 μm |
| Adhaesio | Gradus 1 |
| Flexibilitas | 1mm |
| Crassitudine film et coating rate | |||
| Minimum | Maximum | Typical | |
| Arida film Crassitudo (μm) | 40 | 60 | 50 |
| Infectum film Crassitudo (μm) | 125 | 305 | 155 |
| Theoretical Expansing Rate (m²/kg) | 7.5 | 5 | 6 |
| Construction Parameters | |
| Applicationem Methodo | SPARSIO: Usus airless spargit |
| Brushing: Commendatur pro tunica, parva area pictura, et tactus. | |
| Tenuior / Cleaner | Specialis tenuior |
| DIRECTORIA PRINCIPIA Airless Spraying | |
| COLLUM Pressura | 12-15 MPa |
| COLLUM Orificium | 0.38-0.48 mm (0.015-0.019") |
| Spray Latitudo | 40-80° |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-5% of the total paint quantity |
| DIRECTORIA PRINCIPIA CONVENTALES SPARSIONES | |
| COLLUM Pressura | 0.3-0.6 MPa |
| COLLUM Orificium | 1.8-2.2 mm |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 5-15% of the total paint quantity |
| Percutientium et Rolling | |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-5% of the total paint quantity |
| Remittit Characteres | |||||
| Substratum Temperature | 0℃ | 5℃ | 10℃ | 23℃ | 40℃ |
| tangere arida | II horas | LX minuta | XLV minuta | XXX minuta | XV minuta |
| durum Siccum | XVI horis | XI horis | VIII horas | VI horas | I hora |
| Minimum Recoat Tempus | VIII horas | V horas | III horas | II horas | I hora |
| Maximum Recoat Tempus | Nullus | - | - | - | - |
| Maximum Recoat Tempus | Nullus | - | - | - | - |
ENG
