Fundavit anno 1997,
Zhejiang Bolei Coatings Co., Ltd. Subsidiarium est Societas Bolei Industrialis, cum pluribus subsidiariis occupatis in vestimentis fabricandis, constructionibus servitiis, novis evolutionis materialibus, et commercio internationali.
As professional China Acrylic Aliphatic Polyurethane Topcoat Manufacturers and Custom Acrylic Aliphatic Polyurethane Topcoat Suppliers, we specialize in anti-corrosion coatings, fireproof coatings, emulsion paints, epoxy floor paints, and JS waterproof paints, widely applied in both industrial and construction sectors.
Cum provectae productionis facultates, ratio severa qualitas temperantiae, et catenae materiae rudis stabilis, summus qualitas et cost-competitiva productorum vestis et machinalis solutiones clientibus nostris per orbem terrarum trademus.
Characteres fundamentales
Praeclara glossa et color retenta est;
Egregia tempestas est facienda;
Nullum maximum intervallum recoating;
Repugnant flaventia et creta;
Optimum salis aspergine resistit;
Velox remittit observantia;
Egregia abrasio et impetus repugnantia, et mollities praeclara.
Commendatur usus
Ut summus effectus decorat Topcoat ad usum ut nitet meta in ferro, aluminium, fibreglass, fibreglass, lignum, polyester, et plasticus superficies in ambitus mordaces graviter. Ut primario ad usum in ambitibus mediocriter corrosis.
Superficies Praeparatio
Omnes superficies mundae, aridae et sine sordibus debent esse. Superficies aestimandae sunt et praeparandae ad normam ISO 8504.
Superficies enim pictae, mundae, aridae, et integrae compatibles primers commendantur.
Applicationem Conditions
Subiecta temperatura sub 0°C cadere non debet ac saltem 3°C supra punctum rorem aeris esse debet. Temperatura et humiditas relativa metiri debent circa subiectum. Evacuatio bona plerumque in locis angustiis requiritur ad exsiccationem propriam curandam.
Cum supercoctio, superficies pingere debet esse arida et immunis a contagione.
Product Compatibility
De primario: Zinc-dives primario vel crasso constructo epoxy resinae pingunt
Intermedia: epoxy oxydatum ferri medium
Topcoat: Acrylic aliphatic polyurethane Topcoat
Repono
Secundum normas nationales condi debet. Repositio temperatura commendata est 15-25°C. In ambitu repono siccum, frigus, bene ventilatum, et a fontibus caloris et ignitionis removere debet. Continens arcte occlusum debet custodiri. Ad XXV°C, productum fasciae vitam saltem 12 mensium habet.
Packaging
Component A: 18 kg (basis), Component B (curando agens): 4 kg.
| Technical Specifications | |
| Color | Multiplex |
| Volumen solidorum (%) | 65% |
| Gravitas Imprimis | 1.4 kg/L |
| Flash Point | 25±2 (Caxa clausa) |
| Glossa | Princeps Glossae |
| Volatile Compounds Organic | 300 g/L |
| Commendatur arida film Crassitudo | 50-150 μm |
| Glossa Retention | Praeclarus |
| Aqua Resistentia | Good |
| Abrasio Resistentia | Good |
| Adhaesio | Gradus 0 |
| Impulsum Resistentia | 50cm |
| Flexibilitas | 1mm |
| Resistentia solvendo | Good |
| Crassitudine film et coating rate | |||
| Minimum | Maximum | Typical | |
| Arida film Crassitudo (μm) | 50 | 150 | 100 |
| Infectum film Crassitudo (μm) | 77 | 230 | 145 |
| Theoretical Expansing Rate (m²/kg) | 9.2 | 3.0 | 4.6 |
| Construction Parameters | |
| Applicationem Methodo | SPARSIO: Usus airless spargit vel conventional spargit |
| Brushing: Commendatur pro tunica, parva area pictura, et tactus. | |
| Ratio mixtionis (pondere) | Component A: Component B = 4.5: 1 |
| Tempus inductionis | Nullus |
| Olla vitae (23℃) | Horas 1.5 (decrescat temperatus oritur) |
| Tenuior / Cleaner | Specialis tenuior |
| DIRECTORIA PRINCIPIA Airless Spraying | |
| COLLUM Pressura | 15 MPa |
| COLLUM Orificium | 0.28-0.33 mm (0.011-0.015") |
| Spray Latitudo | 40-80° |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-10% of the total paint quantity |
| DIRECTORIA PRINCIPIA CONVENTALES SPARSIONES | |
| COLLUM Pressura | 0.3-0.6 MPa |
| COLLUM Orificium | 1.8-2.2 mm |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 5-15% of the total paint quantity |
| Percutientium et Rolling | |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-5% of the total paint quantity |
| Remittit Characteres | |||||
| Substratum Temperature | 0℃ | 5℃ | 10℃ | 23℃ | 40℃ |
| tangere arida | X horis | VII horas | IV horas | 1.5 horas | 0,5 horas |
| durum Siccum | XXIV horas | XX horas | X horis | VI horas | II horas |
| Plena Curatio | XX diebus | XV diebus | X diebus | VII diebus | II diebus |
| Minimum Recoat Tempus | XXIV horas | XX horas | X horis | VI horas | II horas |
| Maximum Recoat Tempus | Nullus | - | - | - | - |
ENG
