Fundavit anno 1997,
Zhejiang Bolei Coatings Co., Ltd. Subsidiarium est Societas Bolei Industrialis, cum pluribus subsidiariis occupatis in vestimentis fabricandis, constructionibus servitiis, novis evolutionis materialibus, et commercio internationali.
As professional China Epoxy Top Poena Manufacturers and Custom Epoxy Top Poena Suppliers, we specialize in anti-corrosion coatings, fireproof coatings, emulsion paints, epoxy floor paints, and JS waterproof paints, widely applied in both industrial and construction sectors.
Cum provectae productionis facultates, ratio severa qualitas temperantiae, et catenae materiae rudis stabilis, summus qualitas et cost-competitiva productorum vestis et machinalis solutiones clientibus nostris per orbem terrarum trademus.
Characteres fundamentales
Praeclara oleis variis repugnantia;
Adhibere facile imbre, cylindro, vel penicillo;
Optimum salis aspergine resistit;
Praeclara abrasio et impetus resistendi.
Commendatur usus
Usus est topcoat pro epoxy pingit. Potest etiam adhiberi in superficiebus concretis vel in tectis, a sole directo.
Superficies Praeparatio
Omnes superficies mundae, aridae et sine sordibus debent esse. Superficies aestimandae et praeparandae sunt ad normam ISO 8504. Ad superficies pictas, primarius compatibilis debet esse mundus, siccus et integer.
Applicationem Conditions
Temperatura subiecta non infra 0°C cadere debet ac saltem 3°C supra punctum rorem aeris esse debet. Temperatura et humiditas relativa metiri debent circa subiectum. Evacuatio bona plerumque in locis angustiis requiritur ad exsiccationem propriam curandam. Applicando Topcoat, superficies pingere debet arida et immunis a contagione.
Commendatur Coatings
De primario: Zinc-dives primario vel crasso constructo epoxy resinae pingunt
Medium: epoxy oxydatum ferrum pingere
Topcoat: epoxy Topcoat
Repono
Secundum normas nationales condi debet. Repositio temperatura commendata est 15-25°C. Ambituum repono siccum esse debet et bene ventilari. Vas fasciculum arcte occlusum esse debet.
Shelf Life: 12 months at cella temperies.
Packaging
Component A: 21 kg (basis), Component B (curans agens): 4 kg (durans)
| Technical Specifications | |
| Color | Gray |
| Volumen solidorum (%) | 42% |
| Gravitas Imprimis | 1.6 kg/L |
| Flash Point | 32℃± 2 (Caxa clausa) |
| Glossa | Satin |
| Organic Composita volatilia | 500 g/L |
| Commendatur arida film Crassitudo | 50-100 μm |
| Adhaesio | Gradus 1 |
| Flexibilitas | 1mm |
| Abrasion Resistentia | Praeclarus |
| Resistentia solvendo | bonum |
| Crassitudine film et coating rate | |||
| Descriptio | Minimum | Maximum | Typical |
| Arida film Crassitudo (μm) | 50 | 100 | 75 |
| Infectum film Crassitudo (μm) | 120 | 240 | 180 |
| Theoretical Expansing Rate (m²/kg) | 5.2 | 2.6 | 3.5 |
| Construction Parameters | |
| Applicationem Methodo | SPARSIO: Usus airless spargit |
| Brushing: Commendatur pro tunica, parva area pictura, et tactus. | |
| Tenuior / Cleaner | Specialis tenuior |
| DIRECTORIA PRINCIPIA Airless Spraying | |
| COLLUM Pressura | 12-15 MPa |
| COLLUM Orificium | 0.38-0.48 mm (0.015-0.019") |
| Spray Latitudo | 40-80° |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-5% of the total paint quantity |
| DIRECTORIA PRINCIPIA CONVENTALES SPARSIONES | |
| COLLUM Pressura | 0.3-0.6 MPa |
| COLLUM Orificium | 1.8-2.2 mm |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 5-15% of the total paint quantity |
| Percutientium et Rolling | |
| Tenuior Additio vehicula | Specialis tenuior, the addition amount is generally 0-5% of the total paint quantity |
| Remittit Characteres | |||||
| Substratum Temperature | 0℃ | 5℃ | 10℃ | 23℃ | 40℃ |
| tangere arida | VI horas | I hora | XLV minuta | XXX minuta | XV minuta |
| durum Siccum | XXX horas | X horis | VIII horas | VI horas | IV horas |
| Minimum Recoat Tempus | XXX horas | V horas | IV horas | VI horas | 1.5 horas |
| Maximum Recoat Tempus | Nullus | - | - | - | - |
ENG
